Node View Shortcuts; Network View Tasks - Cisco ONS 15310-MA SDH Procedure Manual

Appendix A CTC Information and Shortcuts

Node View Shortcuts

Table A-4
over the CTC window.
Table A-4
Action
Display card
information
Open, reset, or delete
a card
Preprovision a slot

Network View Tasks

Right-click the network view graphic area or a node, span, or domain to display shortcut menus.
Table A-5
Table A-5
Action
Open a node
Move a node icon
Consolidate links
Save a node icon
position
Reset node icon
position
Provision a circuit
78-19416-01
shows actions on ONS 15310-MA SDH cards that you can perform by moving your mouse
Performing Node View Card Shortcuts
Shortcut
Move your mouse over cards in the graphic to display tooltips with the card
type, card present or card provisioned but not present, the highest level of
alarm (if any), and the alarm profile used by the card.
Right-click a card. Choose Open Card to display the card in card view,
Delete Card to delete it, or Reset Card to reset the card.
In node view, right-click an empty slot. Choose the card type that you want to
provision in the slot from the shortcut menu. For the ONS 15310-MA SDH, see
the "NTP-H162 Preprovision a Card Slot" procedure on page
lists the actions that are available from the network view.
Network Management Tasks in Network View
Task
Any of the following:
• Double-click a node icon.
• Right-click a node icon and choose Open Node from the shortcut menu.
• Click a node and choose Go to Selected Object View from the CTC View
menu.
• From the View menu, choose Go To Other Node. Choose a node from the
Select Node dialog box.
Double-click a node alarm or event in the Alarms or History tabs.
•
Press the Ctrl key and the left mouse button simultaneously and drag the node
icon to a new location.
Right-click on a link and choose Consolidate/Expand from the shortcut menu.
For more detailed instructions, refer to
On the network view map, right-click and choose Save Node Position. Click
Yes on the Save Node Position dialog box.
Right-click a node and choose Reset Node Position from the shortcut menu.
The node icon moves to the position defined by the longitude and latitude fields
on the Provisioning > General tab in node view.
Right-click a node. From the shortcut menu, choose Provision Circuit To and
select the node where you want to provision the circuit. For circuit creation
procedures, see
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
Chapter 9, "Change Port Settings."
Chapter 5, "Create Circuits and VC Low-order Path Tunnels."
Manage the CTC Window
1-33.
A-9