Dlp-H132 Change To The Default Network View Background Map; Dlp-H133 Apply A Custom Network View Background Map - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 17 DLPs H100 to H199

DLP-H132 Change to the Default Network View Background Map

Purpose
Tools/Equipment
Prerequisite procedures
Required/As needed
Onsite/Remote
Security Level
If you modify the background image, the change is stored in your CTC user profile on the local
Note
computer. The change does not affect other CTC users on different computers.
From the View menu, choose Go to Network View.
Step 1
Click the Provisioning > Defaults tabs.
Step 2
Under Defaults Selector, choose CTC and then Network.
Step 3
Click the Default Value field and choose a default map from the drop-down list. The map choices are
Step 4
Germany, Japan, Netherlands, South Korea, United Kingdom, and the United States (default).
Click Apply. The new network map appears.
Step 5
Click OK.
Step 6
Step 7 If the ONS 15310-MA SDH icons are not visible, right-click the network view and choose Zoom Out.
Repeat until all the node icons are visible. (You can also choose Fit Graph to Window.)
If you need to reposition the node icons, drag and drop them one at a time to a new location on the map.
Step 8
If you want to change the magnification of the icons, right-click the network view and choose Zoom In.
Step 9
Repeat until the ONS 15310-MA SDH icons appear at the magnification you want.
Return to your originating procedure (NTP).
Step 10

DLP-H133 Apply a Custom Network View Background Map

Purpose
Tools/Equipment
Prerequisite procedures
Required/As needed
Onsite/Remote
Security Level
You can replace the network view background image with any JPEG or GIF image that is accessible on
Note
a local or network drive. If you apply a custom background image, the change is stored in your CTC user
profile on the local computer. The change does not affect other CTC users on different computers.
78-19416-01
This task changes the background map to the default map of the CTC
network view.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Superuser only
This task changes the background image or map on the CTC network view.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Retrieve or higher
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
17-37