Cisco ONS 15310-MA SDH Procedure Manual page 335

Chapter 16 DLPs H1 to H99
Figure 16-18
In the Login dialog box, type a user name and password (both are case sensitive). For initial setup, type
Step 4
the user name CISCO15 and the password otbu+1.
Note
Step 5 Each time you log into an ONS 15310-MA SDH, you can select the following login options:
Additional Nodes—Displays a list of current login node groups. To create a login node group or to
•
add additional groups, see the
• Disable Network Discovery—Check this box to view only the ONS 15310-MA SDH (and login
node group members, if any) entered in the Node Name field. Nodes linked to this node through
DCCs are not discovered and will not appear in CTC network view. Using this option can decrease
the CTC start-up time in networks with many DCC-connected nodes and reduces memory
consumption.
Disable Circuit Management—Check this box to disable discovery of existing circuits. Using this
•
option can decrease the CTC initialization time in networks with many existing circuits and reduces
memory consumption. This option does not prevent the creation and management of new circuits.
Step 6 If you keep Disable Network Discovery unchecked, CTC attempts to upgrade the CTC software by
downloading more recent versions of the JAR files it finds during the network discovery. Click Yes to
allow CTC to download the newer JAR files, or No to prevent CTC from downloading the JAR files.
Note
78-19416-01
Logging into CTC
The CISCO15 user is provided with every ONS 15310-MA SDH. CISCO15 has Superuser
privileges, so you can create other users. You must create another Superuser before you can
delete the CISCO15 user. CISCO15 is delivered with the otbu+1 password. To change the
password for CISCO15, click the Provisioning > Security tabs after you log in and change the
password. To set up ONS 15310-MA SDH users and assign security, go to the
Users and Assign Security" procedure on page
provided in the Cisco ONS 15310-MA SDH Reference Manual.
Upgrading the CTC software will overwrite your existing software. You must restart CTC after
the upgrade is complete.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
3-3. Additional information about security is
"DLP-H31 Create Login Node Groups" task on page
"NTP-H19 Create
16-46).
16-45