Dlp-H80 Download An Alarm Severity Profile - Cisco ONS 15310-MA SDH Procedure Manual

b.
As needed, perform any of the following actions:
Step 15
•
•
•
Return to your originating procedure (NTP).
Step 16

DLP-H80 Download an Alarm Severity Profile

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
To access the alarm profile editor from network view, click the Provisioning > Alarm Profiles tabs.
Step 1
To access the profile editor from node view, click the
Step 2
Provisioning > Alarm Profiles > Alarm Profile Editor tabs.
To access the profile editor from a card view, click the
Step 3
Provisioning > Alarm Profiles > Alarm Profile Editor tabs.
Click Load.
Step 4
If you want to download a profile that exists on the node, click From Node in the Load Profile(s) dialog
Step 5
box.
a.
b.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
16-98
If you want to save the profile to only one node, click the node in the Node Names list.
•
If you want to save the profile to all nodes, click Select All.
•
If you do not want to save the profile to any nodes, click Select None.
•
If you want to update alarm profile information, click (Synchronize).
•
Save the profile:
Click Browse and navigate to the profile save location.
•
Enter a name in the File name field.
•
Click Select to choose this name and location. Long file names are supported. CTC supplies a
•
suffix of *.pfl to stored files.
Click OK to store the profile.
•
Click the Hide Identical Rows check box to configure the Alarm Profiles window to display rows
with dissimilar severities.
Click the Hide Reference Values check box to configure the Alarm Profiles window to display
severities that do not match the Default profile.
Click the Only show service-affecting severities check box to configure the Alarm Profiles window
not to display Minor and some Major alarms that will not affect service.
This task downloads a custom alarm severity profile from a network-drive
accessible CD-ROM, floppy disk, or hard disk location.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Provisioning or higher
Click the node name you are logged into in the Node Names list.
Click the name of the profile in the Profile Names list, such as Default.
Chapter 16 DLPs H1 to H99
78-19416-01