Cisco ONS 15310-MA SDH Procedure Manual page 26

Figures
NTP-H65 Monitor Electrical Performance
NTP-H66 Monitor Optical Performance
NTP-H67 Monitor Ethernet Performance
NTP-H68 Create or Delete Ethernet RMON Thresholds
NTP-H175 Enable or Disable AutoPM
Manage Alarms
NTP-H56 Document Existing Provisioning
NTP-H57 View Alarms, History, Events, and Conditions
NTP-H58 Delete Cleared Alarms from Display
NTP-H59 View Alarm-Affected Circuits
NTP-H60 Create, Download, and Assign Alarm Severity Profiles
NTP-H61 Enable, Modify, or Disable Alarm Severity Filtering
NTP-H62 Suppress Alarms or Discontinue Alarm Suppression
NTP-H63 Provision External Alarms and Controls
Change Port Settings
NTP-H86 Modify Line Settings and PM Parameter Thresholds for Electrical Ports
NTP-H87 Modify Line Settings and PM Parameter Thresholds for Optical Ports
NTP-H130 Manage Pluggable Port Modules
NTP-H92 Change Card or PPM Service State
NTP-H172 Provision the Soak Timer for an ML-100T-8 Card
Change Node Settings
NTP-H78 Change Node Management Information
NTP-H79 Change CTC Network Access
NTP-H133 Modify OSI Provisioning
NTP-H80 Customize the CTC Network View
NTP-H143 Modify or Delete Card Protection Settings
NTP-H82 Change Node Timing
NTP-H83 Modify Users and Change Security
NTP-H84 Change SNMP Settings
NTP-H85 Modify or Delete Communications Channel Terminations and Provisionable Patchcords
Upgrade Cards and Spans
NTP-H165 Upgrade a E1_21_E3_DS3_3 Card to a E1_63_E3_DS3_3 Card
NTP-H170 Upgrade STM-M Spans Automatically
NTP-H186 Upgrade Optical Spans Manually
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
xxvi
7-3
7-4
7-4
7-6
8-1
8-2
8-5
9-1
9-3
9-4
10-1
10-2
10-3
10-4
10-5
10-6
10-7
11-1
11-5
7-5
8-2
8-3
8-6
8-7
8-7
8-8
9-4
10-2
10-4
11-4
9-2
9-2
10-7
11-1
78-19416-01