Dlp-H32 Add A Node To The Current Session Or Login Group - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 16 DLPs H1 to H99
From the Edit menu,
Step 1
Click Login Node Group and Create Group.
Step 2
Enter a name for the group in the Create Login Group Name dialog box. Click OK.
Step 3
In the Members area, type the IP address (or node name) of a node you want to add to the group. Click
Step 4
Add. Repeat this step for each node you want to add to the group.
Click OK.
Step 5
The next time you log into an ONS 15310-MA SDH, the login node group will be available in the
Additional Nodes list of the Login dialog box. For example, in
created that contains the IP addresses for Nodes 1, 4, and 5. During login, if you choose this group from
the Additional Nodes list and Disable Network Discovery is not selected, all nodes in the figure appear.
If the login group and Disable Network Discovery are both selected, only Nodes 1, 4, and 5 appear. You
can create as many login groups as you need. The groups are stored in the CTC preferences file and are
not visible to other users.
Figure 16-19
192.168.106.143
Node 2
Return to your originating procedure (NTP).
Step 6

DLP-H32 Add a Node to the Current Session or Login Group

Purpose
Tools
Prerequisite Procedures
78-19416-01
Preferences.
choose
Login Node Group
Laptop PC
IP Address
192.168.106.100
Node 1
IP Address
192.168.105.119
Three node ring
Node 3
This task adds a node to the current CTC session or login node group.
None
DLP-H29 Log into CTC, page 16-43
LAN/WAN (Ethernet)
Node 4
IP Address IP Address
192.168.104.109
Single
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
Figure 16-19, a login node group is
Node 5
Two node ring
Node 6
IP Address
192.168.103.199
16-47