Ntp-H83 Modify Users And Change Security - Cisco ONS 15310-MA SDH Procedure Manual

Before You Begin
Stop. You have completed this procedure.

NTP-H83 Modify Users and Change Security

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Step 2.
Complete the
Step 2
Perform any of the following tasks as needed:
Step 3
•
•
•
•
•
•
•
•
•
•
•
Complete the
Step 4
Stop. You have completed this procedure.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
10-6
This procedure modifies user and security properties for the ONS
15310-MA SDH.
None
NTP-H19 Create Users and Assign Security, page 3-3
As needed
Onsite or remote
Superuser only
"DLP-H29 Log into CTC" task on page
"NTP-H102 Back Up the Database" procedure on page
DLP-H141 Change the Security Policy on a Single Node, page 17-44
DLP-H142 Change the Security Policy on Multiple Nodes, page 17-45
DLP-H143 Change Node Access and PM Clearing Privilege, page 17-46
DLP-H234 Grant Superuser Privileges to Provisioning Users, page 18-37
DLP-H144 Change User Password and Security Settings on a Single Node, page 17-48
DLP-H145 Change User Password and Security Settings on Multiple Nodes, page 17-48
DLP-H146 Delete a User on a Single Node, page 17-49
DLP-H147 Delete a User on Multiple Nodes, page 17-50
DLP-H148 Log Out a User on a Single Node, page 17-50
DLP-H149 Log Out a User on Multiple Nodes, page 17-51
DLP-H196 Configure the Node for RADIUS Authentication, page 17-91
"NTP-H102 Back Up the Database" procedure on page
Chapter 10
16-43. If you are already logged in, continue with
14-2.
14-2.
Change Node Settings
78-19416-01