Manage Alarms; Before You Begin - Cisco ONS 15310-MA SDH Procedure Manual

Manage Alarms

This chapter explains how to view and manage the alarms and conditions on a Cisco ONS 15310-MA
SDH.
Cisco Transport Controller (CTC) detects and reports SDH alarms generated by the ONS 15310-MA
SDH and the larger SDH network. You can use CTC to monitor and manage alarms at a card, node, or
network level.

Before You Begin

This section lists the chapter procedures (NTPs). Turn to a procedure for applicable tasks (DLPs).
1.
2.
3.
4.
5.
6.
7.
8.
78-19416-01
NTP-H56 Document Existing Provisioning, page
and export node information.
NTP-H57 View Alarms, History, Events, and Conditions, page
needed to see alarms and conditions occurring on the node and a complete history of alarm and
condition messages.
NTP-H58 Delete Cleared Alarms from Display, page
delete cleared alarm information that is no longer needed.
NTP-H59 View Alarm-Affected Circuits, page
circuits that are affected by a particular alarm or condition.
NTP-H60 Create, Download, and Assign Alarm Severity Profiles, page
procedure as needed to change the default severity for certain alarms; assign the new severities to a
port, card, or node; and delete alarm profiles.
NTP-H61 Enable, Modify, or Disable Alarm Severity Filtering, page
as needed to enable, disable, or modify alarm severity filtering in the Conditions, Alarms, or History
screens; or you can enable, modify, and disable alarm severity filtering at the node or network level.
NTP-H62 Suppress Alarms or Discontinue Alarm Suppression, page
as needed to suppress reported alarms at the port, card, or node level and disable the suppress
command to resume normal alarm reporting.
NTP-H63 Provision External Alarms and Controls, page
to provision external alarms and controls on the 15310E-CTX-K9 card (ONS 15310-MA SDH).
C H A P T E R
8-2—Complete this procedure as needed to print
8-3—Complete this procedure as needed to
8-5—Complete this procedure as needed to find
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
8
8-2—Complete this procedure as
8-6—Complete this
8-7—Complete this procedure
8-7—Complete this procedure
8-8—Complete this procedure as needed
8-1