Cisco ONS 15310-MA SDH Procedure Manual page 327

Chapter 16 DLPs H1 to H99
In the Local Area Connection Properties dialog box, click OK.
f.
In the Local Area Connection Status dialog box, click Close.
g.
If you have Windows XP installed on your PC, complete the following steps to change its TCP/IP
Step 6
configuration:
From the Windows Start menu, choose Control Panel > Network Connections.
a.
Note
In the Network Connections dialog box, click Local Area Connection.
b.
In the Local Area Connection Status dialog box, click Properties.
c.
On the General tab, choose Internet Protocol (TCP/IP), then click Properties.
d.
Click Obtain an IP address from a DHCP server.
e.
Click OK.
f.
In the Local Area Connection Properties dialog box, click OK.
g.
In the Local Area Connection Status dialog box, click Close.
h.
If you have Windows Vista installed on your PC (Release 9.2 only), complete the following steps to
Step 7
change its TCP/IP configuration:
From the Windows Start menu, choose Control Panel > Network and Internet > Network and
a.
Sharing Center > Manage network connections.
Right-click the Local Area Connection icon, then click Properties.
b.
Click the Networking tab. Under This connection uses the following items, click Internet
c.
Protocol Version 4 (TCP/IPv4), then click Properties.
Click Obtain an IP address automatically.
d.
Click OK.
e.
In the Local Area Connection Properties dialog box, click OK.
f.
If you have Windows 7 installed on your PC (Release 9.2 only), complete the following steps to change
Step 8
its TCP/IP configuration:
From the Windows Start menu, choose Control Panel.
a.
In the search box, type adapter, then under Network and Sharing Center, click View Network
b.
Connections.
Right-click the Local Area Connection icon, then click Properties.
c.
Click the Networking tab. Under This connection uses the following items, click Internet
d.
Protocol Version 4 (TCP/IPv4), then click Properties.
Click Obtain an IP address automatically.
e.
Click OK.
f.
In the Local Area Connection Properties dialog box, click OK.
g.
Return to your originating procedure (NTP).
Step 9
78-19416-01
If the Network Connections menu is not available, click Switch to Classic View.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
16-37