Ntp-A1 Unpack And Inspect The Ons 15454 Shelf Assembly, Page - Cisco ONS 15454 Install

NTP- A1 Unpack and Inspect the ONS 15454 Shelf Assembly
•
•
•
•
•
•
•
Test Equipment
The following test equipment is needed to install an ONS 15454:
•
•
•
NTP-A1 Unpack and Inspect the ONS 15454 Shelf Assembly
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
The ONS 15454 high-density shelf (15454-SA-HD) is required if you want to use the high-density
Note
electrical cards (DS3/EC1-48 and DS1/E1-56 cards).
Complete the
Step 1
Step 2 Complete the
Step 3 Continue with the
Stop. You have completed this procedure.
Cisco ONS 15454 Procedure Guide, Release 8.5.1
1-4
Medium slot-head screwdriver
Small slot-head screwdriver
Wire wrapper
Wire cutters
Wire strippers
Crimp tool
BNC insertion tool
Voltmeter
Optical power meter (for use with fiber optics only)
Bit error rate (BER) tester, DS-1 and DS-3
This procedure unpacks the ONS 15454 and verifies the contents.
Pinned hex (Allen) key for front door
Required
Onsite
None
"DLP-A1 Unpack and Verify the Shelf Assembly" task on page
"DLP-A2 Inspect the Shelf Assembly" task on page
"NTP-A2 Install the Shelf Assembly" procedure on page
Chapter 1 Install the Shelf and Backplane Cable
17-1.
17-2.
1-5.
78-18537-01