Dlp-H147 Delete A User On Multiple Nodes; Dlp-H148 Log Out A User On A Single Node - Cisco ONS 15310-MA SDH Procedure Manual

Return to your originating procedure (NTP).
Step 5

DLP-H147 Delete a User on Multiple Nodes

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Note CTC will allow you to delete other Superuser IDs if one Superuser ID remains. For example, you can
delete the CISCO15 user if you have created another Superuser ID. Use this option with caution.
Users who are logged in when you delete them will not be logged out. The delete user action will take
Note
effect after the user logs out. To log out a user who is currently logged in, complete the
Out a User on Multiple Nodes" task on page
From the View menu choose Go to Network View.
Step 1
Click the Provisioning > Security > Users tabs. Click the name of the user you want to delete.
Step 2
Click Delete.
Step 3
In the Delete User dialog box, complete the following:
Step 4
a.
b.
Step 5 In the User Deletion Results dialog box, click OK.
Return to your originating procedure (NTP).
Step 6

DLP-H148 Log Out a User on a Single Node

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
17-50
This task deletes an existing user from multiple nodes.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Superuser only
To log the user out before the deleting the user, check Logout before delete.
Click OK.
This task logs out a user from a single node.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Superuser only
17-51.
Chapter 17 DLPs H100 to H199
"DLP-H149 Log
78-19416-01