Dlp-H126 Modify A Static Route; Dlp-H127 Delete A Static Route - Cisco ONS 15310-MA SDH Procedure Manual

Return to your originating procedure (NTP).
Step 5

DLP-H126 Modify a Static Route

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Network > Static Routing tabs.
Step 1
Click the static route that you want to edit.
Step 2
Click Edit.
Step 3
In the Edit Selected Static Route dialog box, enter the following:
Step 4
•
•
•
See the
Click OK.
Step 5
Return to your originating procedure (NTP).
Step 6

DLP-H127 Delete a Static Route

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Network > Static Routing tabs.
Step 1
Step 2 Click the static route you want to delete.
Step 3 Click Delete. A confirmation dialog box appears.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
17-34
This task modifies a static route on an ONS 15310-MA SDH.
None
DLP-H29 Log into CTC, page 16-43
DLP-H40 Create a Static Route, page 16-55
As needed
Onsite or remote
Provisioning or higher
Mask
Next Hop
Cost
"DLP-H40 Create a Static Route" task on page 16-55
This task deletes a static route on an ONS 15310-MA SDH.
None
DLP-H29 Log into CTC, page 16-43
DLP-H40 Create a Static Route, page 16-55
As needed
Onsite or remote
Provisioning or higher
Chapter 17 DLPs H100 to H199
for detailed field descriptions.
78-19416-01