Cisco ONS 15310-MA SDH Procedure Manual page 284

Before You Begin
Complete the
Step 1
defaults.
Click the Provisioning > Defaults tabs.
Step 2
Click Import.
Step 3
If the correct file name and location of the desired file do not appear in the Import Defaults from File
Step 4
dialog box, click Browse and navigate to the file that you are importing.
When the correct file name and location appear in the dialog box (the correct file name is
Step 5
15310-defaults.txt if you are importing the factory defaults), click OK.
A pencil icon will appear next to any default value that will be changed as a result of importing the new
defaults file.
Step 6 Click Apply.
If the imported file fails to pass all tests, the problem field shows the first encountered problem default
Step 7
value that must be fixed. Change the problem default value and click Apply. Repeat until the imported
file passes all tests successfully.
Note
Note
If you are modifying node-level defaults, a dialog box appears telling you that applying defaults for node
Step 8
level attributes overrides current provisioning and asks if you want to continue. Click Yes.
If you are modifying the IIOP Listener Port setting, a dialog box appears warning you that the node will
Step 9
reboot and asks if you want to continue. Click Yes.
Stop. You have completed this procedure.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
14-20
"DLP-H29 Log into CTC" task on page 16-43
Changes to most node defaults reprovision the node when you click Apply. Changes made to
card settings using the Defaults Editor do not change the settings for cards that are already
installed or slots that are preprovisioned for cards, but rather, change only cards that are installed
or preprovisioned thereafter. To change settings for installed cards or pre-provisioned slots, see
Chapter 10, "Change Node Settings."
Changing some NE defaults can cause CTC disconnection or a reboot of the node in order for
the default to take effect. Before you change a default, view the Side Effects column of the
Defaults editor (right-click a column header and select Show Column > Side Effects) and be
prepared for the occurrence of any side effects listed for that default.
Chapter 14 Maintain the Node
at the node where you want to import NE
78-19416-01