Figure - Cisco ONS 15310-MA SDH Procedure Manual

Return to your originating procedure (NTP).
Step 5
DLP-H169 Use the Reinitialization Tool to Clear the Database and Upload
Software (Windows)
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Restoring a node to the factory configuration deletes all cross-connects on the node.
Caution
Insert the ONS 15310-MA SDH System Software CD, Release 9.1 and Release 9.2 into the computer
Step 1
CD-ROM drive. If the CTC Installation Wizard appears, click Cancel.
From the Windows Start menu, choose Run. In the Run dialog box, click Browse and navigate to the
Step 2
CISCO15310 folder on the software CD.
In the Browse dialog box Files of Type field, choose All Files.
Step 3
Choose the RE-INIT.jar file and click Open. The NE Re-Initialization window appears
Step 4
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
17-60
This task reinitializes the ONS 15310-MA SDH using the CTC
reinitialization tool on a Windows computer. Reinitialization uploads a
new software package to the 15310E-CTX-K9 (ONS 15310-MA SDH)
card, clears the node database, and restores the factory default
parameters.
ONS 15310-MA SDH System Software CD, Release 9.1 and Release
9.2.
Java Runtime Environment (JRE) 5.0 must be installed on the computer
to log into the node at the completion of the reinitialization. JRE 1.6
must be installed for release 9.2. The reinitializtion tool can run on
JRE 1.3.1_02, JRE 1.4.2, JRE 5.0, and JRE 1.6 (release 9.2 only).
NTP-H102 Back Up the Database, page 14-2
NTP-H13 Set Up Computer for CTC, page 2-1
One of the following:
NTP-H14 Set Up TL1 session for Local Craft Connection to the
•
Node, page 2-3
NTP-H15 Set Up a CTC Computer for a Corporate LAN
•
Connection to the Node, page 2-4
As needed
Onsite or remote
Superuser only
Chapter 17 DLPs H100 to H199

(Figure

17-2).
78-19416-01