Dlp-H224 Change Optics Thresholds Settings For Optical Ports; Table 18-1 Optics Thresholds Settings - Cisco ONS 15310-MA SDH Procedure Manual

DLP-H224 Change Optics Thresholds Settings for Optical Ports

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the 15310E-CTX-K9 card.
Step 1
Step 2 Click the Provisioning > Optical > Optics Thresholds tabs.
Note
Modify the settings described in
Step 3
fields, you can choose an option from a drop-down list; in others you can type a value.
Note
Table 18-1
Parameter
Port
LBC-LOW
LBC-HIGH
OPT-LOW
OPT-HIGH
OPR-LOW
OPR-HIGH
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
18-22
This task changes the optics threshold settings on optical ports. Optical
ports on the ONS 15310-MA SDH are provided through Small Form-factor
Pluggables (SFPs) installed on the 15310E-CTX-K9 card (ONS
15310-MA SDH).
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Provisioning or higher
If you want to modify a threshold setting, it might be necessary to click the available directional,
type, and interval (15 Min, 1 Day) radio buttons and then click Refresh. This will display the
desired threshold setting.
Table 18-1
You must set the normalized optical power received (OPR) value whenever you replace or insert
an SFP. After you click Set for the port you are observing, the LBC (%), OPR (%), and OPT (%)
values under the Performance > Optical tabs should be close to 100 percent. Only
Cisco-approved SFPs should be used. See
SFPs and fiber-optic cable.
Optics Thresholds Settings
Description
(Display only) Port number.
Laser bias current–minimum.
Laser bias current–maximum.
Optical power transmitted–minimum.
Optical power transmitted–maximum.
Optical power received–minimum.
Optical power received–maximum.
by clicking in the field that you want to modify. In some
Chapter 1, "" for more information about installing
Options
1-1
•
2-1
•
Default (15 min/1 day): 50 percent
Default (15 min/1 day): 150 percent
Default (15 min/1 day): 80 percent
Default (15 min/1 day): 120 percent
Default (15 min/1 day): 50 percent
Default (15 min/1 day): 200 percent
Chapter 18 DLPs H200 to H299
78-19416-01