Dlp-H29 Log Into Ctc - Cisco ONS 15310-MA SDH Procedure Manual

Hide thumbs Also See for ONS 15310-MA SDH:
Table of Contents

Advertisement

Chapter 16
DLPs H1 to H99
Step 5
Return to your originating procedure (NTP).

DLP-H29 Log into CTC

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
The ONS 15310MA-SDH can be networked with ONS 15454 nodes running Software Release 9.0 or
Note
later. You can log into the ONS 15454 nodes to manage the ONS 15310-MA SDH nodes. However, you
must complete the
"DLP-H22 Run the CTC Installation Wizard for UNIX" task on page
Release 9.1 and Release 9.2 software JAR files on your computer. The tasks must be repeated anytime
you delete the CTC cache.
Note
For information about CTC views and navigation, see
Step 1
From the computer connected to the ONS 15310-MA SDH, start Mozilla Firefox (PC or UNIX) or
Netscape (PC only) to access IPv6 and start Netscape or Internet Explorer to access IPv4.
78-19416-01
Choose Manual proxy configuration to add exceptions to the proxy server. In the No Proxy for
option under the Manual Proxy Configuration, enter the IP addresses of the ONS 15454 nodes that
you access. Separate each address with a comma. Click OK to close each open dialog box.
Note
For ONS 15454 nodes that have TCC2P cards installed with the TCC2P secure mode option
enabled, enter the backplane LAN port IP addresses. If the node is in secure mode and the
configuration has been locked, you will not be able to change the IP address unless the lock
is disabled by Cisco Technical Support. See the "Management Network Connectivity"
chapter in the Cisco ONS 15454 Reference Manual for additional information about secure
mode.
Use this task to log into CTC, the graphical user interface software used to
manage the ONS 15310-MA SDH.
None
NTP-H13 Set Up Computer for CTC, page 2-1
One of the following procedures:
Required
Onsite or remote
Retrieve or higher
"DLP-H21 Run the CTC Installation Wizard for Windows" task on page 16-26
If you are using a PC, launch Netscape or Mozilla Firefox from the Windows Start menu or a
shortcut icon.
If you are using UNIX, launch Netscape or Mozilla Firefox from the command line by typing:
To install Netscape colors for Netscape use, type:
NTP-H15 Set Up a CTC Computer for a Corporate LAN Connection
to the Node, page
2-4, or
NTP-H16 Set Up a Remote Access Connection to the Node, page 2-5
Appendix A, "CTC Information and Shortcuts."
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
16-29. These tasks install the
16-43
or the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents