Cisco ONS 15310-MA SDH Procedure Manual page 600

Manage the CTC Window
Table A-2 CTC Menu and Toolbar Options (continued)
Menu Menu Option
Overhead Circuits
Topology Upgrade
Manage VLANs
Open TL1
Connection
Open IOS
Connection
Update CTC
Help Contents and Index
User Manuals
About CTC
— Network Scope
— Link Filter
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
A-6
Toolbar Description
— (ONS 15454 only) Displays the Repair IP Tunnels option, which fixes circuits
that are in the PARTIAL status as a result of node IP address changes. Refer to
the Cisco ONS 15454 Procedure Guide.
— Displays the following options:
Convert Path Protection to MS-SPRing—(ONS 15454 only) Converts a path
•
protection configuration to a bidirectional line switch ring (MS-SPRing).
Refer to the Cisco ONS 15454 Procedure Guide for more information.
• Convert Unprotected to Path Protection option—Converts a point-to-point
or linear add/drop multiplexer (ADM) to path protection. See the
Convert an Unprotected Point-to-Point or Linear ADM to a Path Protection
Configuration Automatically" procedure on page
— Displays a list of VLANs that have been created and allows you to delete
VLANs. Refer to the Cisco ONS 15310-CL and Cisco ONS 15310-MA SDH
Ethernet Card Software Feature and Configuration Guide.
Displays the TL1 session dialog box so you can create a TL1 session to a
specific node. Refer to the Cisco ONS SDH TL1 Command Guide.
(ONS 15454 only) Displays the Cisco IOS command line interface dialog box if
a Cisco IOS capable card (ML-100T-8, CL-100T-8) is installed in the node.
Refer to the Cisco ONS 1310-CL and Cisco ONS 15310-MA SDH Ethernet Card
Software Feature and Configuration Guide.
—
Allows you to update CTC to a newer version if a newer version was found
during network discovery.
—
Displays the online help window.
— Displays the Cisco ONS 15310-MA SDH documentation.
— Displays the software version and the nodes in the CTC session.
— Displays the selected network scope (applies to ONS 15454 nodes only). The
network scope drop-down list has three options: DWDM, TDM, or All. If you
choose DWDM, DWDM and hybrid nodes appear on the network view map. If
you choose TDM, TDM and hybrid nodes appear on the network view map. If
you choose All, every node on the network appears on the network view map.
Opens the Link Filter dialog box, which allows you to choose which link classes
appear on the non-detail network map. The available classes vary according to
the selected network scope.
• ALL—DCC, GCC, OTS, PPC, server trail
• DWDM—(ONS 15454 nodes only) GCC, OTS, PPC
• TDM—DCC, PPC, server trail
Appendix A CTC Information and Shortcuts
"NTP-H96
12-5.
78-19416-01