Ntp-H155 Install The Electrical Cards - Cisco ONS 15310-MA SDH Procedure Manual

Hide thumbs Also See for ONS 15310-MA SDH:
Table of Contents

Advertisement

Chapter 1
Install the Cisco ONS 15310-MA SDH
Continue with the
Step 8
Stop. You have completed this procedure.

NTP-H155 Install the Electrical Cards

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Warning
Blank faceplates and cover panels serve three important functions: they prevent exposure to
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place.
Statement 1029
During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
Warning
touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
The E1/E3 ports on the ONS 15310-MA SDH are intra-building ports and are suitable only for
Warning
connecting to shielded cabling grounded at both ends. Statement 1084
Ensure that the patch panel is grounded before installing the E1_21_E3_DS3_3 or E1_63_E3_DS3_3
Note
electrical cards on the Cisco ONS 15310-MA SDH chassis.
When installing the unit, always make the ground connection first and disconnect it last. Statement 42.
Warning
Electrical cards can be installed in any traffic card slot (Slot 1, 2, 5, or 6).
Note
In ONS 15310-MA OSP installations, E1/E3 ports are connected to the OSP. The OSP cabinet is
Note
equipped with primary and secondary protections. In addition, isolation transformers are also provided.
78-19416-01
"NTP-H160 Install Optical Cables" procedure on page
This procedure installs electrical cards (E1_21_E3_DS3_3 or
E1_63_E3_DS3_3) in the ONS 15310-MA SDH.
None
DLP-H8 Turn On and Verify DC Office Power on the ONS 15310-MA
SDH, page 16-9
As needed
Onsite
Retrieve or higher
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
Required Tools and Equipment
1-29.
1-23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents