Ntp-H147 Use The Ctc Launcher Application To Manage Multiple Ons Nodes - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 2 Connect the PC and Log into the GUI
NTP-H147 Use the CTC Launcher Application to Manage
Multiple ONS Nodes
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
JRE 5.0 must be installed on the PC you are using with the CTC Launcher application. JRE 1.6 must be
Note
installed for Release 9.2.
As needed, complete one of the following tasks to install the CTC Launcher:
Step 1
•
•
As needed, complete the
Step 2
page 18-67
As needed, complete the
Step 3
install or reinstall the CTC JAR files.
Step 4 As needed, complete one of the following tasks to create a TL1 tunnel, which enables you to connect to
an ONS network element residing behind OSI-based, third-party GNEs:
•
•
Step 5 As needed, complete the
As needed, complete the
Step 6
As needed, complete the
Step 7
Stop. You have completed this procedure.
78-19416-01
This procedure uses the CTC Launcher to start a CTC session with an ONS
NE that has an IP connection to the CTC computer; create TL1 tunnels to
connect to ONS NEs on the other side of third-party, OSI-based GNEs; and
view, manage, and delete TL1 tunnels using CTC.
None
NTP-H13 Set Up Computer for CTC, page 2-1
One of the following procedures:
•
•
As needed
Onsite or remote
Retrieve or higher
DLP-H266 Install the CTC Launcher Application from a Release 9.1 and Release 9.2 Software CD,
page 18-66
DLP-H267 Install the CTC Launcher Application from a Release 9.1 and Release 9.2 Node,
page 18-66
"DLP-H268 Connect to ONS Nodes Using the CTC Launcher" task on
to connect to an ONS network element with direct IP connectivity.
"DLP-H275 Install or Reinstall the CTC JAR Files" task on page 18-74
"DLP-H269 Create a TL1 Tunnel Using the CTC Launcher" task on page 18-68
"DLP-H270 Create a TL1 Tunnel Using CTC" task on page 18-69
"DLP-H271 View TL1 Tunnel Information" task on page
"DLP-H272 Edit a TL1 Tunnel Using CTC" task on page
"DLP-H273 Delete a TL1 Tunnel Using CTC" task on page
NTP-H14 Set Up TL1 session for Local Craft Connection to the Node,
page 2-3
NTP-H15 Set Up a CTC Computer for a Corporate LAN Connection
to the Node, page 2-4
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
Before You Begin
to
18-70.
18-71.
18-72.
2-7