Dlp-H27 Disable Proxy Service Using Internet Explorer (Windows) - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 16 DLPs H1 to H99
c.
d.
e.
f.
g.
h.
i.
Step 9 Return to your originating procedure (NTP).

DLP-H27 Disable Proxy Service Using Internet Explorer (Windows)

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
From the Start menu, select Settings > Control Panel.
Step 1
Note
Step 2 In the Control Panel window, choose Internet Options.
Step 3 In the Internet Properties dialog box, click Connections > LAN Settings.
In the LAN Settings dialog box, complete one of the following tasks:
Step 4
•
•
Return to your originating procedure (NTP).
Step 5
78-19416-01
Right-click the Local Area Connection icon, then click Properties.
Click the Networking tab. Under This connection uses the following items, click Internet
Protocol Version 4 (TCP/IPv4), then click Properties.
Click Use the following IP address, then in the IP Address field, enter any legitimate IP address
other than the node IP address as indicated on the LCD of the ONS 15454. The default IP address
is 192.1.0.2.
In the Subnet Mask field, type the same subnet mask as the ONS 15454. The default is
255.255.255.0 (24 bit).
Type the IP address entered in Step
Click OK.
In the Local Area Connection Properties dialog box, click Close.
This task disables proxy service for PCs running Internet Explorer.
None
NTP-H13 Set Up Computer for CTC, page 2-1
As needed
Onsite or remote
None
If your computer is running Windows XP, you can select Control Panel directly from the Start
menu. Make sure that you are in Classic View before continuing with this procedure. To switch
to Classic View, right-click the Windows screen and choose Properties from the popup menu.
Click the Appearance tab, then under Scheme, choose Classic View.
Uncheck Use a proxy server to disable the service.
To bypass the service, leave Use a proxy server selected and click Advanced. In the Proxy Setting
dialog box under Exceptions, enter the IP addresses of ONS 15310-MA SDH nodes that you will
access. Separate each address with a semicolon. You can insert an asterisk for the host number to
include all the ONS 15310-MA SDH nodes on your network. Click OK to close each open dialog
box.
e in the Gateway Address field.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
16-41