Ntp-H105 View The Audit Trail Records - Cisco ONS 15310-MA SDH Procedure Manual

Before You Begin
Cisco recommends that you take care to save the node database to safe location if you are not restoring
Caution
the node using the database provided on the software CD.
The following parameters are not backed up and restored when you delete the database and restore the
Note
factory settings: node name, IP address, subnet mask and gateway, and IIOP port. If you change the node
name and then restore a backed up database with a different node name, the circuits map to the new
renamed node. Cisco recommends keeping a record of the old and new node names.
If you are using Microsoft Windows, complete the
Step 1
Database and Upload Software (Windows)" task on page
If you are using UNIX, complete the
Step 2
and Upload Software (UNIX)" task on page
Stop. You have completed this procedure.

NTP-H105 View the Audit Trail Records

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 Complete the
trail log. If you are already logged in, continue with
Step 2 In the node view, click the Maintenance > Audit tabs.
Step 3 Click Retrieve.
A window containing the most recent audit trail records appears as shown in
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
14-6
"DLP-H170 Use the Reinitialization Tool to Clear the Database
This procedure explains how to view audit trail records. Audit trail
records prove useful for maintaining security, recovering lost
transactions, and enforcing accountability. Accountability refers to
tracing user activities; that is, associating a process or action with a
specific user.
None
None
As needed
Onsite or remote
Provisioning (if granted privilege through NE Defaults) or higher.
"DLP-H29 Log into CTC" task on page 16-43
"DLP-H169 Use the Reinitialization Tool to Clear the
17-60.
17-62.
at the node where you want to view the audit
Step 2.
Chapter 14 Maintain the Node
Figure 14-2.
78-19416-01