Dlp- H267 Install The Ctc Launcher Application From A Release 9.1 And Release 9.2 Node - Cisco ONS 15310-MA SDH Procedure Manual

DLP-H266 Install the CTC Launcher Application from a Release 9.1 and Release
9.2 Software CD
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Insert the Cisco ONS 15454 or Cisco ONS 15310-MA SDH Software Release 9.1 and Release 9.2 CD
Step 1
into your CD drive.
Navigate to the CtcLauncher directory.
Step 2
Save the StartCTC.exe file to a local hard drive.
Step 3
Return to your originating procedure (NTP).
Step 4
DLP-H267 Install the CTC Launcher Application from a Release 9.1 and Release
9.2 Node
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Using a web browser, go to the following address, where node-name is the DNS name of a node you are
Step 1
going to access:
The browser File Download dialog box appears.
Click Save.
Step 2
Navigate to the location where you want to save the StartCTC.exe file on the local hard drive.
Step 3
Click Save.
Step 4
Return to your originating procedure (NTP).
Step 5
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
18-66
This task installs the CTC Launcher from a Release 9.1 and Release 9.2
software CD.
None
NTP-H13 Set Up Computer for CTC, page 2-1
As needed
Onsite or remote
None
This task installs the CTC Launcher from an ONS 15310-MA SDH node
running Software Release 9.1 and Release 9.2.
None
NTP-H13 Set Up Computer for CTC, page 2-1
As needed
Onsite or remote
None
http://node-name/fs/StartCTC.exe
Chapter 18 DLPs H200 to H299
78-19416-01