Chapter 17 Dlps H100 To H199; Dlp-H100 View Optical Stm-M Pm Parameters; Dlp-H101 View Ether Ports And Pos Ports Statistics Pm Parameters - Cisco ONS 15310-MA SDH Procedure Manual

DLPs H100 to H199

DLP-H100 View Optical STM-M PM Parameters

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the 15310E-CTX-K9 card. The card view appears.
Step 1
Click the Performance > Optical tabs.
Step 2
Step 3 The PM parameter names appear on the left side of the window in the Param column. The PM values
appear on the right side of the window in the Curr (current) and Prev-n (previous) columns. For PM
parameter definitions, refer to the "Performance Monitoring" chapter in the Cisco ONS 15310-MA SDH
Reference Manual.
Return to your originating procedure (NTP).
Step 4

DLP-H101 View Ether Ports and POS Ports Statistics PM Parameters

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
78-19416-01
C H A P T E R
This task enables you to view PM counts on an optical (STM-M) port to
detect possible performance problems.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Retrieve or higher
This task enables you to view current statistical PM counts on a
CE-Series or ML-Series Ethernet card and port to detect possible
performance problems.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Retrieve or higher
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
17
17-1