Ntp-H109 Clean Fiber Connectors - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 14 Maintain the Node

NTP-H109 Clean Fiber Connectors

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Class 1 laser product. Statement 1008
Warning
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
Warning
beams or view directly with optical instruments. Statement 1051
Do not reuse the optical swabs. Keep unused swabs off of work surfaces.
Caution
Replace all dust caps whenever the equipment is not to be immediately used.
Note
Using an inspection microscope, inspect each fiber connector for dirt, cracks, or scratches.
Step 1
Replace any damaged fiber connectors.
Step 2
Complete the
Step 3
Complete the
Step 4
Note To clean multi-fiber optic connectors, complete the
Connectors" task on page 17-66
Stop. You have completed this procedure.
78-19416-01
This procedure cleans the fiber connectors.
Inspection microscope
Type A Fiber Optic Connector Cleaner (CLETOP reel)
Optical swab
Optical receiver cleaning stick
None
Required
Onsite
None
"DLP-H175 Clean Fiber Connectors with CLETOP" task on page 17-67
"DLP-H176 Clean the Fiber Adapters" task on page 17-67
as necessary.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
as necessary.
"DLP-H174 Clean Multi Fiber-Optic Cable
Before You Begin
as necessary.
14-11