Dlp-H146 Delete A User On A Single Node - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 17 DLPs H100 to H199
From the View menu, choose Go to Network View. Verify that you can access all the nodes where you
Step 1
want to add users.
Click the Provisioning > Security > Users tabs. Click the user's name whose settings you want to
Step 2
change.
Click Change. The Change User dialog box appears.
Step 3
In the Change User dialog box, you can:
Step 4
•
•
•
See the
Click OK. A Change Results confirmation dialog box appears.
Step 5
Click OK to acknowledge the changes.
Step 6
Return to your originating procedure (NTP).
Step 7

DLP-H146 Delete a User on a Single Node

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
CTC will allow you to delete other Superuser IDs if one Superuser ID remains. For example, you can
Note
delete the CISCO15 user if you have created another Superuser ID. Use this option with caution.
Users who are logged in when you delete them will not be logged out. The delete user action will take
Note
effect after the user logs out. To log out a user who is currently logged in, complete the
Out a User on a Single Node" task on page
In node view, click the Provisioning > Security > Users tabs.
Step 1
Choose the user you want to delete.
Step 2
In the Delete User dialog box, complete the following:
Step 3
a.
b.
In the User Deletion Results dialog box, click OK.
Step 4
78-19416-01
Change a user password
Modify the user security level
Lock out or disable the user
"DLP-H38 Create a New User on Multiple Nodes" task on page 16-51
This task deletes an existing user from a single node.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Superuser only
To log the user out before the deleting the user, check Logout before delete.
Click OK.
17-50.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
for field descriptions.
"DLP-H148 Log
17-49