Dlp-H79 Create A Cloned Alarm Severity Profile - Cisco ONS 15310-MA SDH Procedure Manual

DLP-H79 Create a Cloned Alarm Severity Profile

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
To access the alarm profile editor from network view, click the Provisioning > Alarm Profiles tabs.
Step 1
To access the profile editor from node view, click the
Step 2
Provisioning > Alarm Profiles > Alarm Profile Editor tabs.
To access the profile editor from a card view, click the
Step 3
Provisioning > Alarm Profiles > Alarm Profile Editor tabs.
Step 4 If you want to create a profile using an existing profile located on the node, click Load and From Node
in the Load Profile(s) dialog box.
a.
b.
If you want to create a profile using an existing profile located in a file that is stored locally or on a
Step 5
network drive, click From File in the Load Profile(s) dialog box.
a.
b.
c.
Note
Click OK.
Step 6
The alarm severity profile appears in the Alarm Profiles window.
Right-click anywhere in the profile column to display the profile editing shortcut menu. (Refer to
Step 7
Step 11
Click Clone in the shortcut menu.
Step 8
Tip
In the New Profile or Clone Profile dialog box, enter a name in the New Profile Name field.
Step 9
Profile names must be unique. If you try to import or name a profile that has the same name as another
profile, CTC adds a suffix to create a new name. Long file names are supported.
Click OK.
Step 10
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
16-96
This task creates a custom severity profile or clones and modifies the
default severity profile
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Provisioning or higher
Click the node name you are logged into in the Node Names list.
Click the name of an existing profile in the Profile Names list, such as Default. Then go to
Click Browse.
Navigate to the file location in the Open dialog box.
Click Open.
All default or user-defined severity settings that are Critical (CR) or Major (MJ) are demoted to
Minor (MN) in Non-Service-Affecting (NSA) situations as defined in Telcordia GR-474.
for further information about the Default profile.)
To see the full list of profiles, including those available for loading or cloning, click Available.
You must load a profile before you can clone it.
Chapter 16 DLPs H1 to H99
Step 6.
78-19416-01