Figure 1-1 Installing The Standard Cable Management Bracket - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 1 Install the Cisco ONS 15310-MA SDH
Figure 1-1
To secure the bracket to the shelf, use the screwdriver to install three 8-32 x 0.31 inch (0.79 cm) screws,
Step 2
torqued to 15 to 18 inch-lbs.
If you are installing the extended bracket, install two 8-32 x 0.31 inch (0.79 cm) screws, torqued to 15
Step 3
to 18 inch-lbs, through the top of the bracket directly into the ESD faceplates adjacent to Slots 1 and 6
on either side of shelf
78-19416-01
Installing the Standard Cable Management Bracket
(Figure 1-2).
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
Required Tools and Equipment
1-7