Ntp-H139 Export Network Element Defaults - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 14 Maintain the Node

NTP-H139 Export Network Element Defaults

Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Note The defaults currently displayed are exported whether or not they have been applied to the current node.
Note The NE defaults can also be exported from the File > Export menu. These exported defaults are for
reference only and cannot be imported.
Step 1 Complete the
defaults.
Step 2 Click the Provisioning > Defaults tabs.
Step 3 Click Export.
Step 4 If the desired file to export to does not appear in the Export Defaults to File dialog box (or does not yet
exist) click Browse and browse to the directory where you want to export the data; then either choose or
type in (to create) the file to export to [the defaults will be exported as a text file delimited by equals (=)
signs].
Click OK.
Step 5
Stop. You have completed this procedure.
78-19416-01
This procedure exports the NE defaults using the NE Defaults editor. The
exported defaults can be imported to other nodes.
None
As needed
Onsite or remote
Retrieve or higher.
"DLP-H29 Log into CTC" task on page 16-43
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
Before You Begin
at the node where you want to export NE
14-21