Ntp-H106 Offload The Audit Trail Record - Cisco ONS 15310-MA SDH Procedure Manual

Before You Begin

NTP-H106 Offload the Audit Trail Record

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
audit trail log. If you are already logged in, continue with
Step 2 In the node view, click the Maintenance > Audit tabs.
Click Retrieve.
Step 3
Click Archive.
Step 4
In the Archive Audit Trail dialog box, navigate to the directory (local or network) where you want to
Step 5
save the file.
Enter a name in the File Name field.
Step 6
Use .txt.gz as the extension. This creates a .gzip file. Use WinZip or GNU gzip to uncompress the file.
The uncompressed file is readable in any application that supports text files, such as WordPad,
Microsoft Word (imported), etc.
Step 7 Click Save.
Entries not saved in the previous archive are saved in this file. The next entries continue with the next
number in the sequence, rather than starting over.
Note
Stop. You have completed this procedure.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
14-8
This procedure describes how to offload up to 640 audit trail log entries
in a local or network drive file to maintain a record of actions performed
for the node. If the audit trail log is not off-loaded, the oldest entries are
overwritten after the log reaches capacity.
None
None
As needed
Onsite or remote
Provisioning or higher
"DLP-H29 Log into CTC" task on page 16-43
Archiving does not delete entries from the CTC audit trail log. However, entries can be
self-deleted by the system after the log maximum is reached. If you archived the entries, you
cannot reimport the log file back into CTC. View the log in a different application.
Chapter 14
at the node where you want to off-load the
Step 2.
Maintain the Node
78-19416-01