Dlp-H73 View Alarm Or Event History - Cisco ONS 15310-MA SDH Procedure Manual

Table 16-7
VC high-order path and VC Low-order Path Alarm Numbering
MON Object
(Optical)
E3 VC low-order
path
TERM Object
(Electrical)
T1 VC high-order
path
T1 VC low-order
path
T3 STS
T3 VC low-order
path
1. Maximum VC high-order path number depends on the rate and size of the VC high-order path.
If alarms are present, refer to the Cisco ONS 15310-MA SDH Troubleshooting Guide for information and
Step 2
troubleshooting procedures.
Return to your originating procedure (NTP).
Step 3

DLP-H73 View Alarm or Event History

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
To view node alarm history, proceed to
Step 1
card alarm history, proceed to
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
16-90
STC and VC Low-order Path Alarm Object Identification (continued)
Syntax and Examples
Syntax: VT1-<Slot>-<Port>-<STS>-<VT Group>-<VT>
Ranges: VT1-{2}-{1-3}-{1-n
Example: VT1-2-1-6-1-1
Syntax and Examples
Syntax: STS-<Slot>-<STS>
Ranges: STS-{2}-{1-n
Example: STS-2-6
Syntax: VT1-<Slot>-<STS>-VT Group>-<VT>
Ranges: VT1-{2}-{1-n
Example: VT1-2-6-1-1
Syntax: STS-<Slot>-<Port>-<STS>
Ranges: STS-{2}-{1-3}-{1-n
Example: STS-2-1-6
VT not supported
This task views past cleared and uncleared ONS 15310-MA SDH alarm
messages at the card, node, or network level. This task is useful for
troubleshooting configuration, traffic, or connectivity issues that are
indicated by alarms.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Retrieve or higher
Step
Step 4.
1
}-{1-7}-{1-4}
1
}
1
}-{1-7}-{1-3}
1
}
2. To view network alarm history, proceed to
Chapter 16 DLPs H1 to H99
Step 3. To view
78-19416-01