Dlp-H279 Change Sdh Threshold Settings For Stm-N Cards - Cisco ONS 15310-MA SDH Procedure Manual

Hide thumbs Also See for ONS 15310-MA SDH:
Table of Contents

Advertisement

Chapter 18
DLPs H200 to H299
In the node view, double-click a card to open the card view.
Step 1
In the card view, click the Provisioning > Ether Ports tabs.
Step 2
For the G1000 card, in the card view, click the Provisioning > Port tabs.
Note
In the Line area, enable the link integrity soak timer feature by unchecking the check box in the Link
Step 3
Integrity Disable column for the corresponding port number.
For the G1000 card, change the Admin State to locked, outOfGroup or locked, maintenance for the
Note
corresponding port number. Enable the link integrity soak timer feature by unchecking the check box in
the Link Integrity Disable column for the corresponding port number.
If the check box under the Link Integrity Disable column is checked, the Link Integrity Timer field for
Note
the corresponding port number will be disabled.
Step 4
Enter the desired link integrity soak duration in the Link Integrity Timer column for the corresponding
port number. Enter the link integrity soak duration in the range between 200 and 10000 ms, in multiples
of 100 ms.
Note
The default link integrity timer value is 200 ms.
Click Apply to set the specified link integrity soak timer.
Step 5
Return to your originating procedure (NTP).
Step 6

DLP-H279 Change SDH Threshold Settings for STM-N Cards

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
For the default values and domains of user-provisionable card settings, refer to the "Network Element
Note
Defaults" appendix in the Cisco ONS 15310-MA SDH Reference Manual.
In node view, double-click the STM-N card where you want to change the SDH threshold settings.
Step 1
Click the Provisioning > SDH Thresholds tabs.
Step 2
78-19416-01
This task changes threshold settings for STM-N cards.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Provisioning or higher
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
18-77

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents