DLP-H144 Change User Password and Security Settings on a Single Node
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Security > Users tabs.
Step 1
Click the user whose settings you want to modify.
Step 2
Click Change.
Step 3
In the Change User dialog box, you can:
Step 4
•
•
•
See the
Step 5
Click OK.
Note
Step 6
Return to your originating procedure (NTP).
DLP-H145 Change User Password and Security Settings on Multiple Nodes
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Note
You must add the same user name and password to each node the user will access.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
17-48
This task changes settings for an existing user at one node.
None
DLP-H29 Log into CTC, page 16-43
DLP-H37 Create a New User on a Single Node, page 16-50
As needed
Onsite or remote
Superuser only
Change a user password
Modify the user security level
Lock out or disable the user
"DLP-H37 Create a New User on a Single Node" task on page 16-50
User settings that you changed during this task will not appear until that user logs off and logs
back in.
This task changes settings for an existing user on multiple nodes.
None
DLP-H29 Log into CTC, page 16-43
DLP-H38 Create a New User on Multiple Nodes, page 16-51
As needed
Onsite or remote
Superuser only
Chapter 17
DLPs H100 to H199
for field descriptions.
78-19416-01