Cisco ONS 15310-MA SDH Procedure Manual page 565

Chapter 18 DLPs H200 to H299
Note
Step 5 In the Subnet Mask field, type 255.255.255.0. Skip this step if you checked Enable Socks Proxy on Port
and External Network Element (ENE) at Provisioning > Network > General > Gateway Settings.
Step 6 Test the connection:
a. Start Netscape Navigator.
b. Enter the ONS 15310-MA SDH IP address in the web address (URL) field. If the connection is
established, a Java Console window, CTC caching messages, and the Cisco Transport Controller
Login dialog box appear. If this occurs, go to Step 2 of the
page 16-43
At the prompt, type:
c.
ping ONS 15310-MA SDH-IP-address
or
For example, to connect to an ONS 15310-MA SDH with a default IP address of 192.1.0.2, type:
ping 192.1.0.2
If your workstation is connected to the ONS 15310-MA SDH the following message appears:
IP-address is alive
Note
d. If CTC is not responding, a "Request timed out" (Windows) or a "no answer fromx.x.x.x" (UNIX)
message appears. Verify the IP and subnet mask information. Check that the cables connecting the
workstation to the ONS 15310-MA SDH are securely attached. Check the link status by typing:
# ndd -set /dev/device instance 0
# ndd -get /dev/device link_status
For example:
# ndd -set /dev/hme instance 0
# ndd -get /dev/hme link_status
A result of "1" means the link is up. A result of "0" means the link is down.
Note
Return to your originating procedure (NTP).
Step 7
78-19416-01
Enter an IP address that is identical to the ONS 15310-MA SDH IP address except for the last
octet. The last octet must be 1 or 3 through 254.
to complete the login. If the Login dialog box does not appear, complete Steps
Skip this step if you checked Enable Socks Proxy on Port and External Network Element
(ENE) at Provisioning > Network > General > Gateway Settings.
Check the man page for ndd. For example: # man ndd.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
"DLP-H29 Log into CTC" task on
c and d.
18-65