Dlp-H275 Install Or Reinstall The Ctc Jar Files - Cisco ONS 15310-MA SDH Procedure Manual

In the Designated SOCKS Server field, type the IP address or DNS node name of the first ONS
Step 3
15310-MA SDH SOCKS server. The ONS 15310-MA SDH that you enter must have SOCKS proxy
server enabled, and it must have LAN access.
Click Add. The node is added to the SOCKS server list. If you need to remove a node on the list, click
Step 4
Remove.
Repeat Steps
Step 5
that have SOCKS proxy enabled and are connected to the LAN should be added.
Click Check All Servers. A check is conducted to verify that all nodes can perform as SOCKS servers.
Step 6
If so, a check is placed next to the node IP address or node name in the SOCKS server list. An X placed
next to the node indicates one or more of the following:
•
•
•
•
Click Apply. The list of ONS 15310-MA SDH nodes, including ones that received an X in
Step 7
added as SOCKS servers.
Click OK to close the Preferences dialog box.
Step 8
Return to your originating procedure (NTP).
Step 9

DLP-H275 Install or Reinstall the CTC JAR Files

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Insert the Cisco ONS 15310-MA SDH Software Release 9.1 and Release 9.2 CD into your CD drive.
Step 1
Navigate to the CacheInstall directory.
Step 2
The CTC cache installer is also available on Cisco.com. If you are downloading the
Note
SetupCtc-version.exe (where version is the release version, for example, SetupCtc-085000.exe) file from
Cisco.com, skip
Copy the SetupCtc-version.exe file to your local hard drive. Use any location that is convenient for you
Step 3
to access, such as the Windows desktop. Ensure that you have enough disk space to copy and extract the
SetupCtc-version.exe file.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
18-74
3 and 4 to add all qualified ONS 15310-MA SDH nodes within the network. All ONS nodes
The entry does not correspond to a valid DNS name.
The numeric IP address is invalid.
The node cannot be reached.
The node can be reached, but the SOCKS port cannot be accessed, for example, a firewall problem
might exist.
This task installs or reinstalls the CTC JAR files into the CTC cache
directory on your PC. This is useful when you are using a new CTC version
and want to install or reinstall the CTC JAR files without logging into a
node or using the StartCTC application (StartCTC.exe).
None
NTP-H13 Set Up Computer for CTC, page 2-1
As needed
Onsite or remote
None
Step 1 and Step 2.
Chapter 18 DLPs H200 to H299
Step 6, are
78-19416-01