Dlp-H245 Modify A 1:1 Protection Group For The Ons 15310-Ma Sdh; Dlp-H248 Mount A Single Ons 15310-Ma Sdh In A Rack - Cisco ONS 15310-MA SDH Procedure Manual

DLP-H245 Modify a 1:1 Protection Group for the ONS 15310-MA SDH

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Protection tabs.
Step 1
In the Protection Groups area, click the 1:1 protection group you want to modify.
Step 2
In the Selected Group area, you can modify the following, as needed:
Step 3
•
•
•
Click Apply.
Step 4
Return to your originating procedure (NTP).
Step 5

DLP-H248 Mount a Single ONS 15310-MA SDH in a Rack

Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
18-50
This task modifies a 1:1 protection group for electrical (E1_21_E3_DS3_3
or E1_63_E3_DS3_3) cards.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Provisioning or higher
Name—As needed, type the changes to the protection group name. The name can have up to
32 alphanumeric characters.
Revertive—Check this box if you want traffic to revert to the working card after failure conditions
stay corrected for the amount of time chosen from the Reversion Time drop-down list. Uncheck if
you do not want traffic to revert.
Reversion time—If the Revertive check box is selected, choose the reversion time from the
Reversion time drop-down list. The range is 0.5 to 12.0 minutes. The default is 5.0 minutes. This is
the amount of time that will elapse before the traffic reverts to the working card. Traffic can revert
when conditions causing the switch are cleared.
This task allows one person to mount the MA shelf assembly in a rack.
#12-24 mounting screws (4)
#10-32 ear mounting screws (8)
#2 Phillips screwdriver
Universal mounting ear
19-inch-rack mounting ear
23-inch -rack mounting ear
Fuse and alarm panel, if not installed
As needed
Onsite
None
Chapter 18 DLPs H200 to H299
78-19416-01