Figure 1-11 Installing The Rear Cover - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 1 Install the Cisco ONS 15310-MA SDH
Figure 1-11
Install and tighten the six panhead screws onto the holes on the hexagonal standoffs.
Step 4
Note
Stop. You have completed this procedure.
78-19416-01
Installing the Rear Cover
You can also reverse the order of the procedure, and install the panhead screws onto the
hexagonal standoffs first, place the rear cover on the standoffs, and finally tighten the panhead
screws. The rear cover has oval cut-outs to allow this operation.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
Required Tools and Equipment
1-39