Dlp-H234 Grant Superuser Privileges To Provisioning Users - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 18 DLPs H200 to H299
Table 18-6
Parameter
Port #
CV
ES
FC
SES
UAS
Note
Return to your originating procedure (NTP).
Step 7

DLP-H234 Grant Superuser Privileges to Provisioning Users

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Defaults tabs.
Step 1
Step 2 In the Defaults Selector area, choose NODE > security > grantPermission.
Step 3 Click in the Default Value column for the default property you are changing and choose Provisioning
from the drop-down list.
Note
Step 4 Click Apply.
A pencil icon will appear next to the default name that will be changed as a result of editing the defaults
file.
78-19416-01
SDH Thresholds Options for E1 Ports
Description
E1 ports partitioned for synchronous transport signal (VC high-order
path)
1 to 28 (E1_21_E3_DS3_3; ONS 15310-MA SDH only)
•
• 1 to 84 ((E1_63_E3_DS3_3; ONS 15310-MA SDH only)
Coding violations. Available for Near End and Far End.
Errored seconds. Available for Near End and Far End.
Failure count. Available for Near End and Far End.
Severely errored seconds. Available for Near End and Far End.
Unavailable seconds. Available for Near End and Far End.
The threshold value displays after the circuit is created.
This task enables a provisioning user to retrieve audit logs, clear PM
privileges, restore databases, and activate and revert software loads.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Superuser only
If you click Reset before you click Apply, all values will return to their original settings.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
18-37