Table Display Options - Cisco ONS 15310-MA SDH Procedure Manual

Manage the CTC Window
Table A-5
Action
Update circuits with
new node
Display a link end
point
Display span
properties
Perform a path
protection switch for
an entire span
Upgrade a span
Upgrade terminal to
linear

Table Display Options

Right-clicking a table column displays a menu.
rearranging or hiding CTC table columns and sorting table columns by primary or secondary keys.
Table A-6
Task
Resize column
Rearrange column order Click while dragging the column
Reset column order
Hide column
Show column
Display all hidden
columns
Sort table (primary)
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
A-10
Network Management Tasks in Network View (continued)
Task
Right-click a node and choose Update Circuits With New Node from the
shortcut menu. Use this command when you add a new node and want to pass
circuits through it.
Right-click a span. From the shortcut menu, choose Go To [<node> | <port> |
<slot>] for the drop port you want to view. CTC displays the card in card view.
Any of the following:
Move your mouse over a span; the properties appear near the span.
•
Click a span; the properties appear in the upper left corner of the window.
•
Right-click a span; the properties appear at the top of the shortcut menu.
•
Right-click a network span and click Circuits. In the Circuits on Span dialog
box, switch options appear in the Path Protection Span Switching field. See
also the "DLP-H166 Initiate a Path Protection Force Switch on a Span" task on
page 17-58.
Right-click a span and choose Upgrade Span from the shortcut menu.
Span upgrades do not upgrade SDH topologies, for example, a 1+1
Note
group to a path protection configuration.
Right-click a span and choose Upgrade Protection > Terminal to Linear
from the shortcut menu. See the
Linear ADM Automatically" procedure on page
Table Display Options
Click
Click while dragging the column
separator to the right or left.
header to the right or left.
—
—
—
—
Click a column header; each click
changes the sort order (ascending or
descending).
Appendix A
"NTP-H136 Convert a Point-to-Point to a
12-2.
Table A-6 shows table display options, which include
Right-Click Shortcut Menu
—
—
Choose Reset Columns
Order/Visibility.
Choose Hide Column.
Choose Show Column >
column_name
Choose Reset Columns
Order/Visibility.
Choose Sort Column.
CTC Information and Shortcuts
78-19416-01