Before You Begin; Ntp-H13 Set Up Computer For Ctc - Cisco ONS 15310-MA SDH Procedure Manual

Connect the PC and Log into the GUI
This chapter explains how to connect Windows PCs and Solaris workstations to the
Cisco ONS 15310-MA SDH, and how to log into Cisco Transport Controller (CTC) software. CTC is
the Cisco ONS 15310-MA SDH Operation, Administration, Maintenance and Provisioning (OAM&P)
user interface. Procedures for connecting to the ONS 15310-MA SDH using Transaction Language 1
(TL1) are provided in the Cisco ONS SDH TL1 Command Guide.

Before You Begin

This section lists the chapter procedures (NTPs). Turn to a procedure for applicable tasks (DLPs).
1.
2.
3.
4.
5.
6.

NTP-H13 Set Up Computer for CTC

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
78-19416-01
NTP-H13 Set Up Computer for CTC, page
has never been connected to an ONS 15310-MA SDH.
NTP-H14 Set Up TL1 session for Local Craft Connection to the Node, page
procedure to set up your computer for an onsite craft connection to the ONS 15310-MA SDH.
NTP-H15 Set Up a CTC Computer for a Corporate LAN Connection to the Node,
page 2-4—Complete this procedure to set up your computer to connect to the ONS 15310-MA SDH
using a corporate LAN.
NTP-H16 Set Up a Remote Access Connection to the Node, page
set up your computer for remote modem access to the ONS 15310-MA SDH.
NTP-H17 Log into the GUI, page
NTP-H147 Use the CTC Launcher Application to Manage Multiple ONS Nodes,
page 2-7—Complete this procedure to use the CTC Launcher Application.
This procedure explains how to configure your Windows PC or Solaris
workstation to run CTC.
Cisco ONS 15310-MA SDH Release 9.1 and Release 9.2 software CD
Chapter 1, "Install the Cisco ONS 15310-MA SDH"
Required
Onsite or remote
None
C H A P T E R
2-1—Complete this procedure if your PC or workstation
2-5—Complete this procedure to log into CTC.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
2
2-3—Complete this
2-5—Complete this procedure to
2-1