Dlp-H90 Refresh Electrical Or Optical Pm Counts At Fifteen-Minute Intervals - Cisco ONS 15310-MA SDH Procedure Manual

Click Refresh. The PM counts for the newly selected port appear.
Step 4
Return to your originating procedure (NTP).
Step 5

DLP-H90 Refresh Electrical or Optical PM Counts at Fifteen-Minute Intervals

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the 15310E-CTX-K9 or electrical card. The card view appears.
Step 1
Note
Click the Performance tab.
Step 2
Click the E1, DS3, E3, or Optical tabs.
Step 3
Click the 15 min radio button.
Step 4
Click Refresh. Performance monitoring parameters appear in 15-minute intervals synchronized with the
Step 5
time of day.
View the Curr column to find PM counts for the current 15-minute interval.
Step 6
Each monitored performance parameter has corresponding threshold values for the current time period.
If the value of the counter exceeds the threshold value for a particular 15-minute interval, a threshold
crossing alert (TCA) is raised. The PM number represents the counter value for each specific
performance monitoring parameter.
View the Prev-n columns to find PM counts for the previous 15-minute intervals.
Step 7
If a complete 15-minute interval count is not possible, the value appears with a yellow background. An
incomplete or incorrect count can be caused by monitoring for less than 15 minutes after the counter
started, changing node timing settings, changing the time zone settings, replacing a card, resetting a card,
or changing port states. When the problem is corrected, the subsequent 15-minute interval appears with
a white background.
Return to your originating procedure (NTP).
Step 8
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
16-108
This task changes the window view to display PM counts in 15-minute
intervals.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Retrieve or higher
In an ONS 15310-MA SDH node, the 15310E-CTX-K9 card provides optical ports and the
E1_21_E3_DS3_3 and E1_63_E3_DS3_3 cards provide electrical ports.
Chapter 16 DLPs H1 to H99
78-19416-01