Figure 18-1 Selecting Ctc Data For Print - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 18 DLPs H200 to H299
The print operation is available for all network, node (default login), and card view windows.
From the File menu, choose Print.
Step 2
In the Print dialog box, click a a printing option
Step 3
Entire Frame—Prints the entire CTC window including the graphical view of the card, node, or
•
network. This option is available for all windows.
Tabbed View—Prints the lower half of the CTC window containing tabs and data. The printout
•
includes the selected tab (on top) and the data shown in the tab window. For example, if you print
the History window Tabbed View, you print only history items appearing in the window. This option
is available for all windows.
Table Contents—Prints CTC data in table format without graphical representations of shelves,
•
cards, or tabs.The Table Contents option prints all the data contained in a table with the same column
headings. For example, if you print the History window Table Contents view, you print all data
included in the table whether or not items appear in the window.
Tip
Figure 18-1
Step 4 Click OK.
In the Windows Print dialog box, click a printer and click OK.
Step 5
Repeat this task for each window that you want to print.
Step 6
Return to your originating procedure (NTP).
Step 7
78-19416-01
When you print using the Tabbed View option, it can be difficult to determine whether the
printout applies to the network, node, or card view. Look at the tabs to determine which view
you are printing. Network, node, and card views are identical except that network view does not
contain an Inventory tab; node view and card view contain a Performance tab.
Selecting CTC Data For Print
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
(Figure 18-1).
18-19