Dlp-H130 Delete A Firewall Tunnel; Dlp-H131 Change The Network View Background Color - Cisco ONS 15310-MA SDH Procedure Manual

DLP-H130 Delete a Firewall Tunnel

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Network > Firewall subtabs.
Step 1
Click the firewall tunnel that you want to delete.
Step 2
Click Delete.
Step 3
Return to your originating procedure (NTP).
Step 4

DLP-H131 Change the Network View Background Color

Purpose
Tools/Equipment
Prerequisite procedures
Required/As needed
Onsite/Remote
Security Level
If you modify background colors, the change is stored in your CTC user profile on the local computer.
Note
The change does not affect other CTC users on different computers.
From the View menu, choose Go to Network View.
Step 1
Right-click the network view or domain map area and
Step 2
menu.
In the Choose Color dialog box, click a background color.
Step 3
Click OK.
Step 4
Return to your originating procedure (NTP).
Step 5
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
17-36
This task removes a firewall tunnel.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Superuser only
This task changes the network view background color and the domain view
background color (the area shown when you open a domain).
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Retrieve or higher
Chapter 17
Set Background Color from the shortcut
choose
DLPs H100 to H199
78-19416-01