Dlp-H34 Delete A Node From A Specified Login Node Group; Dlp-H35 Change The Jre Version - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 16 DLPs H1 to H99

DLP-H34 Delete a Node from a Specified Login Node Group

Purpose
Tools
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 From the CTC Edit menu, choose Preferences.
Step 2 In the Preferences dialog box, click the Login Node Groups tab.
Click the login node group tab containing the node you want to remove.
Step 3
Select the node you want to remove, then click Remove.
Step 4
Click OK.
Step 5
Return to your originating procedure (NTP).
Step 6

DLP-H35 Change the JRE Version

Purpose
Tools
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
From the Edit menu, choose Preferences.
Step 1
Click the JRE tab. The JRE tab shows the current JRE version and the recommended version.
Step 2
Click the Browse button and navigate to the JRE directory on your computer.
Step 3
Choose the JRE version.
Step 4
Click OK.
Step 5
From the File menu, choose Exit.
Step 6
In the confirmation dialog box, click Yes.
Step 7
Complete the
Step 8
78-19416-01
This task removes a node from a specified login node group. To remove a
node from the current login node group, see the
from the Current Session or Login Group" task on page
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Provisioning or higher
This task changes the JRE version, which is useful if you would like to
upgrade to a later JRE version from earlier one without using the software
or documentation CD. This does not affect the browser default version.
After selecting the desired JRE version, you must exit CTC. The next time
you log into a node, the new JRE version will be used.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Provisioning or higher
"DLP-H29 Log into CTC" task on page
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
"DLP-H33 Delete a Node
16-43.
16-48.
16-49