Dlp-B272 Change Node Security Policy - Multiple Nodes - Cisco ONS 15327 Procedure Manual

NTP-B205 Modify Users and Change Security
•
•
Under Concurrent Logins, click Single Session Per User if you want to limit users to a single login
Step 4
session.
Under Password Change, you can modify the following:
Step 5
•
•
Users can change their passwords after they meet one of the two conditions. For example, if you set the
number of different passwords to 5 and the number of days to 20, users can reuse a password after they
change the password 5 times or after 20 days elapse, whichever occurs first.
Step 6 Click Apply. Confirm that the changes appear.
Return to your originating procedure (NTP).
Step 7

DLP-B272 Change Node Security Policy - Multiple Nodes

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 From the View menu choose Go to Network View.
Step 2 Click the Provisioning > Security > Policy tabs. A read-only table of nodes and their policies is
displayed.
Step 3 Click a node on the table that you want to modify, then click the Change button.
Under Idle User Timeout, you can modify the timeout times by clicking the hour (H) and minute (M)
Step 4
arrows. You can choose values between 0 and 16 hours, and 0 and 59 minutes.
Under User Lockout, you can modify the following:
Step 5
•
•
•
Cisco ONS 15327 Procedure Guide, R4.0
9-18
Manual Unlock by Superuser—Allows a user with Superuser privileges to manually unlock a user
who has been locked out from a node.
Lockout Duration—Sets the amount of time the user will be locked out after a failed login. You can
choose a value between 0 and 10 minutes, and 0 and 55 seconds (in five-second intervals).
Require [nn] different passwords...—Choose a value between 0 and 10 to determine how many
different passwords have to be created before a password can be reused.
...or a waiting period of [nn] days before password reuse—Choose a value between 0 and 30 days
to set the amount of time (in days) before a password can be reused.
This task changes the security policy for multiple nodes, including idle
user timeouts, user lockouts, password change, and concurrent login
policies.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Superuser
Failed Logins Before Lockout—The number of failed login attempts a user can make before the user
is locked out from the node. You can choose a value between 0 and 10.
Manual Unlock by Superuser—Allows a user with Superuser privileges to manually unlock a user
who has been locked out from a node.
Lockout Duration—Sets the amount of time the user will be locked out after a failed login. You can
choose a value between 0 and 10 minutes, and 0 and 55 seconds (in five-second intervals).
Chapter 9 Change Node Settings
March 2003