Dlp-B223 Download An Alarm Severity Profile - Cisco ONS 15327 Procedure Manual

NTP-B70 Create, Download, and Assign Alarm Severity Profiles

DLP-B223 Download an Alarm Severity Profile

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, choose Go to Network View from the View menu
Step 1
Step 2 Click the Provisioning > Alarm Profiles tabs.
Click Load.
Step 3
If you want to download a file from the local PC hard drive, floppy disk, CD-ROM, or a network drive
Step 4
(if connected), click the From File radio button in the Select Profile(s) from Node or Filename to Load
dialog box.
a.
b.
c.
d.
Continue with
Step 5 If you want to download a file from the login node or another connected node, click the From Node radio
button in the Select Profile(s) from Node or Filename to Load dialog box.
a.
b.
Click OK in the Select Profile(s) from Node or Filename to Load dialog box.
Step 6
The downloaded profile appears at the right side of the Alarm Profiles window.
Right-click anywhere in the downloaded profile column to display the profile editing shortcut menu.
Step 7
Click Store in the shortcut menu.
Step 8
In the Store Profile(s) dialog box, click the To Node(s) radio button
Step 9
a.
Cisco ONS 15327 Procedure Guide, R4.0
6-20
Use this task to download a custom alarm severity profile from a
network-drive accessible CD-ROM, floppy disk, or hard drive location.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Provisioning or higher
Click Browse.
The Open dialog box appears.
In the Look in drop-down menu, navigate to the folder where the profile file is located.
Click the name in the window to highlight it.
The file must have the *.pfl extension.
Click Open.
Step 6.
Click the node where the profile is located under the Node Names list.
Click the profile under the Profile Names list.
Choose the node(s) where you want to save the profile:
If you want to save the profile to only one node, click the node in the Node Names list.
•
• If you want to save the profile to all nodes, click Select All.
If you do not want to save the profile to any nodes, click Select None.
•
If you want to update alarm profile information, click Synchronize.
•
Chapter 6 Manage Alarms
(Figure 6-3 on page 6-6).
(Figure 6-9 on page 6-19).
November 2004