Dlp-B110 View Alarm History - Cisco ONS 15327 Procedure Manual

NTP-B196 View Alarms, History, Events, and Conditions

DLP-B110 View Alarm History

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
To view node alarm history, proceed to
Step 1
card alarm history, proceed to
To view node alarm history:
Step 2
a.
b.
Tip
To view network alarm history, from node view click View > Go to Network View.
Step 3
Click the History tab.
Step 4
Alarms and conditions (events) raised during the current session appear.
To view card alarm history, from the network view click View > Go to Previous View.
Step 5
The previous view is the node (default login) view.
Step 6 From node view, double-click a card on the shelf graphic to display the card-level view for the card.
Note
a.
b.
In the node or card view, display Not-Alarmed (NA) and transient event (condition) history in addition
Step 7
to alarm history by clicking the Events check box in the History > Node window or
History > Card window.
Cisco ONS 15327 Procedure Guide, R4.0
6-8
Use this task to view past cleared and uncleared ONS 15327 alarm
messages at the card, node, or network level. This task is useful for
troubleshooting configuration, traffic, or connectivity issues that are
indicated by alarms.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Retrieve
Click the History > Session tabs if you want to view the alarms and conditions (events) raised
during the current session (since you logged into the CTC).
Click the History > Node tabs to retrieve all available alarm messages for the node.
Double-click an alarm in the alarm table or an event (condition) message in the history table to
display the view that corresponds to the alarm message. Double-click a card alarm to display the
card view. In network view, double-click a node alarm to display the node view.
Mechanical Interface cards (MICs) do not have a card view.
Click the History > Session tabs to view the alarm messages raised during the current session.
Click the History > Card tabs to retrieve all available alarm messages for the card.
The ONS 15327 can store up to 640 critical alarm messages, 640 major alarm messages, 640
Note
minor alarm messages, and 640 condition messages. When any of these limits is reached,
the ONS 15327 discards the oldest events in that category.
Step 2. To view network alarm history, proceed to
Step 5.
Chapter 6 Manage Alarms
Step 3. To view
November 2004