Table Display Options - Cisco ONS 15327 Procedure Manual

Manage the CTC Window
Table A-5
Action
Provision a circuit
Update circuits with
new node
Display a link end
point
Display span
properties
Perform a path
protection switch for
an entire span
Upgrade a span

Table Display Options

Right-clicking a table column displays a menu.
rearranging or hiding CTC table columns and sorting table columns by primary or secondary keys.
Table A-6
Task
Resize column
Rearrange column order Left-click while dragging the column
Reset column order
Hide column
Show column
Display all hidden
columns
Sort table (primary)
Cisco ONS 15327 Procedure Guide, R4.0
A-8
Network Management Tasks in Network View (continued)
Task
Right-click a node. From the shortcut menu, choose Provision Circuit To and
select the node where you want to provision the circuit. For circuit creation
procedures, see
Right-click a node and choose Update Circuits With New Node from the
shortcut menu. Use this command when you add a new node and want to pass
circuits through it.
Right-click a span. From the shortcut menu, choose Go To [node/slot/port] for
the drop port you want to view. CTC displays the card in card view.
Any of the following:
• Move your mouse over a span; the properties appear near the span.
• Click a span; the properties appear in the upper left corner of the window.
Right-click a span; the properties appear at the top of the shortcut menu.
•
Right-click a network span and click Circuits. In the Circuits on Span dialog
box, switch options are displayed in the path protection Span Switching field.
See also the "DLP-B197 Initiate a Path Protection Force Switch" task on
page 13-16.
Right-click a span and choose Upgrade Span from the shortcut menu.
For detailed span upgrade information and instructions, see
Note
Chapter 11, "Upgrade Cards and Spans."
Table Display Options
Click
Left-click while dragging the header
separator to the right or left.
header to the right or left.
—
—
—
—
Click a column header; each click
changes the sort order (ascending or
descending).
Appendix A
Chapter 5, "Create Circuits and VT Tunnels."
Table A-6 shows table display options, which include
Right-Click Shortcut Menu
—
—
Choose Reset Columns
Order/Visibility.
Choose Hide Column.
Choose Show Column >
column_name
Choose Reset Columns
Order/Visibility.
Choose Sort Column.
CTC Information and Shortcuts
March 2003