Dlp- D158 Change User Password And Security Level On A Single Node - Cisco ONS 15454 SDH Procedure Manual

Chapter 18 DLPs D100 to D199
•
•
•
•
•
•
•
•
•
Click Apply.
Step 6
Note
Return to your originating procedure (NTP).
Step 7
DLP-D158 Change User Password and Security Level on a Single Node
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Security > Users tabs.
Step 1
Click the user whose settings you want to modify.
Step 2
Click Change.
Step 3
In the Change User dialog box, you can:
Step 4
•
•
•
See the
Click OK.
Step 5
Note
78-17194-01
Facility Type: E1, 2 MHz
BITS In State
BITS Out State
Coding
Framing
Sync Messaging
Admin SSM
AIS Threshold
Sa Bit
Refer to the "Timing" chapter in the Cisco ONS 15454 SDH Reference Manual for timing
information.
This task changes settings for an existing user at one node.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Superuser
Change the existing user password
Change the existing user security level
Lock out the user
"NTP-D30 Create Users and Assign Security" procedure on page 4-4
User settings that you changed during this task will not appear until that user logs off and logs
back in.

DLP- D158 Change User Password and Security Level on a Single Node

Cisco ONS 15454 SDH Procedure Guide, R7.0
for fields and descriptions.
18-49