Figure 1-29 Installing The Rear Cover - Cisco ONS 15454 Series Procedure Manual

Required Tools and Equipment (ETSI)
Figure 1-29
Figure 1-29
Step 6 Continue with the
Stop. You have completed this procedure.
NTP-G14 Install DWDM Equipment
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 Complete the
Step 2 Complete the
Step 3 Complete the
Complete the
Step 4
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
1-66
shows rear cover installation.
Installing the Rear Cover
"NTP-G14 Install DWDM Equipment" procedure on page
This procedure installs the optional DWDM assemblies.
#2 Phillips Dynamometric screwdriver
Crimping tool (large enough for #10 to #14 AWG)
#14 AWG wire
NTP-G306 Install the ONS 15454 Shelf Assembly, page 1-8
As needed
Onsite
None
"DLP-G27 Install the DCU Shelf Assembly" task on page 1-67
"DLP-G28 Install the Fiber Patch-Panel Tray" task on page 1-68
"DLP-G29 Install the Fiber-Storage Tray" task on page 1-68
"DLP-G371 Install the Ethernet Adapter Panel" task on page 1-69
Chapter 1 Install the Cisco ONS 15454 Shelf Assembly
1-66.
as needed.
as needed.
as needed.
as needed.
78-19286-01