ABB IRB 8700 Series Product Manual page 92

2 Installation and commissioning
2.4.2 Mechanically restricting the working range of axis 1
Continued
Mechanical stops, axis 1
The illustration shows the mounting position of the stop pin and one of the additional
mechanical stops available for axis 1.
xx1400002592
Required equipment
Equipment, etc.
Standard toolkit
Technical reference manual - System
parameters
Installation, mechanical stops axis 1
Use this procedure to fit the additional mechanical stops to axis 1 of the robot. An
assembly drawing is also enclosed with the product.
1
Continues on next page
92
Action
DANGER
Turn off all:
• electric power supply to the robot
• hydraulic pressure supply to the robot
• air pressure supply to the robot
Before entering the robot working area.
© Copyright 2015-2018 ABB. All rights reserved.
A
B
Article number Note
-
- Article number is specified in
section
Note
References on page 10.
Product manual - IRB 8700
3HAC052853-001 Revision: F